Android Based Volleyball Passing Test Instrument Development Design

Destriana Destriana; Destriani Destriani; Ahmad Richard Victorian; Syariah Syariah

doi:10.33503/jp.jok.v6i2.2274

Destriana Destriana Universitas Sriwijaya
Destriani Destriani Universitas Sriwijaya
Ahmad Richard Victorian Universitas Sriwijaya
Syariah Syariah Universitas Sriwijaya

DOI: https://doi.org/10.33503/jp.jok.v6i2.2274

Keywords: Instrument, Volleyball Pass, Android Based

Abstract

This study aims to see how the design or design of an android-based volleyball passing test instrument. This study uses the Research and Development (R n d) method using the ADDIE model. The ADDIE model is the Analysis phase, Design phase, Development phase, Implementation phase and Evaluation Phase. This research was carried out on July 17-20 September 2022. This research is only at the design stage, where at this design stage it only displays concepts that are made systematically with the intention of making the product to be developed. The results of this study are where the product is designed using a fitting test tool made with a laser and sensor installed in the test area then Arduino Mega as the brain or input and output controller of a circuit then added with NodeMCU can be used as a data sender so that it can be sent to the application that has been made. and downloaded on an Android-based cellphone, which was created with the help of the internet. Based on this design, it is hoped that it can be continued at the stage of developing an Android-based test instrument. This research is used as the basis for developing an android-based volleyball passing test instrument.

References

Abdullah, S. K. (2019). Remote Heart Rate Monitor System using NodeMcu Microcontroller and easy pulse sensor v1.1. IOP Conference Series: Materials Science and Engineering, 518(5). https://doi.org/10.1088/1757-899X/518/5/052016

Aditya Gumantan. (2020). Pengembangan Aplikasi Pengukuran Tes kebugaran Jasmani Berbasis Android. Jurnal Ilmu Keolahragaan, 19(2), 196–205. https://doi.org/https://doi.org/10.24114/jik.v19i2.21828

Al Azka, H. H., Setyawati, R. D., & Albab, I. U. (2019). Pengembangan Modul Pembelajaran. Imajiner: Jurnal Matematika Dan Pendidikan Matematika, 1(5), 224–236. https://doi.org/10.26877/imajiner.v1i5.4473

Cahyadi, R. A. H. (2019). Pengembangan Bahan Ajar Berbasis Addie Model. Halaqa: Islamic Education Journal, 3(1), 35–42. https://doi.org/10.21070/halaqa.v3i1.2124

Dewi, R., & Daulay, B. (2020). Development of Digital-Based Volleyball Passing Test Instruments. JURNAL PRESTASI, 4(1), 9–16. https://doi.org/https://doi.org/10.24114/jp.v4i1.16821

Giartama Giartama, Destriani Destriani, Waluyo Waluyo, M. M. (2020). Efektivitas alat tes servis bolavoli berbasis mikrokontroller. Jurnal SPORTIF : Jurnal Penelitian Pembelajaran, 6(2), 499–513. https://doi.org/https://doi.org/10.29407/js_unpgri.v6i2.14492

Guntur, Sukadiyanto, D. M. (2014). Jurnal Penelitian dan Evaluasi Pendidikan. Jurnal Penelitian Dan Evaluasi Pendidikan, 18(1), 13–29. https://doi.org/https://doi.org/10.21831/pep.v18i1.2121

Hasnul Haris. (2021). Pengembangan Instrumen Tes Passing Bola Voli Berbasis Smartphone. Universitas Negeri Medan.

Ilham, Muhamad, Oktafiranda, D. (2019). PENGEMBANGAN BAHAN AJAR MATA KULIAH TEORI DAN PRAKTIK BOLAVOLI BERBASIS E-LEARNING. 1, 89–96. https://doi.org/https://doi.org/10.21009/segar/0902/04

Indrakasih, Sinulingga, A., Lumbaraja, F., & Pasaribu, A. M. N. (2022). Development of test forms of down passing techniques in sensor-based volleyball games. Journal Sport Area, 7(2), 300–309. https://doi.org/10.25299/sportarea.2022.vol7(2).9012

Jalil, A. M. A., Mohamad, R., Anas, N. M., Kassim, M., & Suliman, S. I. (2021). Implementation of vehicle ventilation system using nodemcu ESP8266 for remote monitoring. Bulletin of Electrical Engineering and Informatics, 10(1), 327–336. https://doi.org/10.11591/eei.v10i1.2669

Kavitha BC, Vallikannu R, and S. K. (2020). Delay-aware concurrent data management method for IoT collaborative mobile edge computing environment. Microprocessors and Microsystems, 74(April). https://doi.org/https://doi.org/10.1016/j.micpro.2020.103021

Kurnia, T. D., Lati, C., Fauziah, H., & Trihanton, A. (2019). Model ADDIE Untuk Pengembangan Bahan Ajar Berbasis KemampuanM Pemecahan Masalah Berbantuan 3D Pageflip. Seminar Nasional Pendidikan Matematika, 1(1), 516–525. http://www.fkip-unswagati.ac.id/ejournal/index.php/snpm/article/view/844

Mu’arifuddin, M. A. (2018). Kelayakan Aspek Materi dan Media dalam Pengembangan Bahan Ajar Bola Voli Berbasis Kontekstual. JOSSAE : Journal of Sport Science and Education, 3(1), 12. https://doi.org/10.26740/jossae.v3n1.p12-15

Mubashir Ali, Nosheen Kanwal, Aamir Hussain, Fouzia Samiullah, Aqsa Iftikhar, M. Q. (2020). IoT based smart garden monitoring system using NodeMCU microcontroller. International Journal of ADVANCED AND APPLIED SCIENCES, 7(8), 117–124. https://doi.org/10.21833/ijaas.2020.08.012

Node MCU. (2019). NodeMcu Connect Things EASY. https://bit.ly/2UbON2g

Rohendi, A. (2019). Development of Passing Learning Model to Based Games Volley Ball. OURNAL OF PHYSICAL AND OUTDOOR EDUCATION, 1(1), 1–12.

Samuel Purba, Zulfan Heri, R. H. (2020). PENGEMBANGAN ALAT INSTRUMEN BLEP TEST DENGAN MENGGUNAKANSENSORLASERBERBASIS MIKROKONTROLER. Jurnal Ilmu Keolahragaan, 19(2), 188–195. https://doi.org/https://doi.org/10.24114/jik.v19i2.32834

Septiani, S., & Puspita Sari, Y. (2021). Pengembangan Model Latihan Smash Bola Voli. Edukasimu.Org, 1(3), 2021–2022.

Trianto. (2012). Model Pengembangan Terpadu. Jakarta: Bumi Aksara.

Vai, A., Jawak, J. F., Wijayanti, N. P. N., & Gusdernawati, A. (2021). Pengembangan media pembelajaran teknik passing bawah menggunakan media gambar dalam pada permainan bola voli di smp santa veronika. Journal of Sport Education (JOPE), 3(2), 127. https://doi.org/10.31258/jope.3.2.127-136